FAQ

From berofix - professional SIP gateway
Jump to: navigation, search
(Creating the Appliance Boot Stick)
(My beroNet Gateway doesn't respond to network requests anymore)
Line 257: Line 257:
  
 
http://www.beronet.com/wp-content/uploads/downloads//berofix/dsp_firmware/dsp-firmware-13.tar.gz
 
http://www.beronet.com/wp-content/uploads/downloads//berofix/dsp_firmware/dsp-firmware-13.tar.gz
 +
 +
=== I want to send Modem, Unrestricted Digital or Fax (without T.38) calls to a VoIP Provider, but these calls fail ===
 +
 +
The beroNet Gateway can transmit data calls without modifying the audio (eg. with Echocancelation, Jitter compensation or codec translation) to a voip carrier with the clearmode or clearchannel feature. To use the clear mode a dialplan rule from ISDN (or Analog) to SIP must be created. In the additional configuration options of the dialplan rule under "more" the setting:
 +
 +
clearmode_on_alaw=1
 +
 +
must be set.
 +
 +
If the destination is another beroNet gateway, it needs a dialplan rule from SIP to ISDN (or Analog) with the same additional configuration option.
 +
It is important that the SIP codec is set to alaw/pcma in the SIP account.
  
 
== beroNet Telephony Appliance FAQ ==  
 
== beroNet Telephony Appliance FAQ ==  

Revision as of 16:16, 29 October 2014

Personal tools